Computerized Architectural and Industrial Design – A.A.S. Degree Program
REQUIREMENTS FOR THE A.A.S. DEGREE
GENERAL EDUCATION CORE REQUIREMENTS Credits
EN-101, 102 English Composition I, II - 6
SS- or HI- Electives in Social Science§ or History§ (HI-100 series) - 6
MA-114✥ College Algebra and Trigonometry for
Technical Students✥- 4
PH-101* Principles of Physics - 4
Sub-total 20
REQUIREMENTS FOR THE MAJOR
MT-122 or Manufacturing Processes or ✥✥
MT-219 ✥✥ Surveying and Layouts - 3
MT-111 Technical Graphics - 2
MT-124§ Metallurgy and Materials - 3
MT-212 Technical Descriptive Geometry - 3
MT-341 Applied Mechanics - 3
MT-345§ Strength of Materials - 3
MT-453 Piping Systems - 3
MT-454 Fundamentals of HVAC Systems - 2
MT-481§ Architectural Design Fundamentals - 3
MT-482§ Structural Drafting and Design - 3
MT-484 Construction Methods - 3
MT-369 Computer Applications in Engineering Technology - 3
MT-488§ Computer-Aided Design Drafting (CADD) - 3
MT-489§ Advanced Computer-Aided Design Drafting (ADCADD) - 3
Sub-total 40
Total Credits Required 60
* Students may take PH-201 in place of PH-101.
✥Students may take MA-440 or 441 in place of MA-114.
✥✥ Students interested in architecture/construction should take MT-219. Those interested in manufacturing and graphics should take MT-122.
Note: Students planning to pursue a BS Arch./M Arch. or B Arch. should take PH-201 and MA-441.
Note: On the basis of a speech test administered to all students upon admission, up to two semesters of remedial speech may be required.
§ Sections of this course denoted as “WI” may be taken to partially satisfy the Writing Intensive Requirement.
Two (2) Writing Intensive classes are required for the Associate degree..
SUGGESTED SEQUENCE OF COURSES
Semester 1 Credits
EN-101 English Composition I - 3
MA-114✥ College Algebra and Trigonometry for Technical Students✥- 4
MT-122 or Manufacturing Processes or MT-219§ Surveying and Layout – 3
MT-111 Technical Graphics – 2
MT-124§ Metallurgy and Materials – 3
Sub-total 15
Semester 2
EN-102 English Composition II – 3
SS or HI Elective in Social Science or History – 3
MT-212 Technical Descriptive Geometry – 3
MT-341 Applied Mechanics – 3
MT-488§ Computer-Aided Design Drafting (CADD) – 3
Sub-total 15
Semester 3
SS- or Elective in Social Science or HI- History (selected from HI-100 series) – 3
MT-345 Strength of Materials – 3
MT-453 Piping Systems – 3
MT-481 Architectural Design Fundamentals - 3
MT-489§ Advanced CADD - 3-4
Sub-total 15
Semester 4
PH-101 Principles of Physics – 4
MT-369 Computer Applications in Engineering Technology – 3
MT-454 Fundamentals of HVAC Systems – 2
MT-482 Structural Drafting and Design - 3
MT-484 Construction Methods. – 3
Sub-total 15
